|
Q: How long do the surfaces last?
A: Depends upon the usage, what the surface is used for and installation. Choose the right surface for your needs. Generally all surfaces will last a minimum of 5 years with correct maintenance with premium surfaces lasting as long as 20 years.
Q: Does the Colour fade?
A: No - All surfaces are UV Stabilised which means they will not be affected by sunlight
Q: Does the surface rot?
A: No - All the surfaces are made from tough polypropylene, nylon fibres or polyethylene which will not collapse with correct usage.
Q: Why do most surfaces need sand infill?
A: Clean, dry, graded sand is filtered deep into the fibres so as to give the surface greater stability (preventing creases). The sand also assists with drainage, helping to create a smoother surface (putting greens) and in some cases aiding traction.
Q: Can surfaces be loose laid
A: yes some surfaces can be. but generally you will need to hold down the surface either by gluing, screwing Or in some cases holding down with weights
Q: Can I carry out installation myself?
A: Yes - we will provide you with installation details and likely cost. We do not use a third party to carry out installation so installations are either carried out by us or you.
Q: What Maintenance is required?
A: Surfaces need to be kept clean and free form debris. Regular brushing will keep your surface in tip top condition. Every year or so the surface may require thourgh cleaning. If over time the surface has moss, algae or slime formation then the power brushing will be required. This involves the use of a motorised broom to remove the sand infill and debris. Clean graded sand is then used to replace the old sand.
Q: Can you supply small or large quantities?
A: Yes and no. We can supply a minimum of 2m2 - 2x1m. If however you would like say 5 x 1m2 pieces we would ask you buy 2x3m and cut it yourself. We can supply larger quantities please call with your specific requirements.
Q: Do you supply a guarantee
A: Yes we supply a minimum of two years on all surfaces and up to 5 on some surfaces
Q: Can fire damage the surface?
A: Heat will not affect surface. Direct flame can cause melting of the surface, however the sand/ rubber infill prevents ignition.
Q: Can ants and worms come through surface?
A: We lay a membrane layer over the sub base. This creates a impenetrable barrier.
|
